Add hd-idle

etc/auto.master##hostname.pi01

@@ -0,0 +1,38 @@
+#
+# Sample auto.master file
+# This is a 'master' automounter map and it has the following format:
+# mount-point [map-type[,format]:]map [options]
+# For details of the format look at auto.master(5).
+#
+#/misc	/etc/auto.misc
+#
+# NOTE: mounts done from a hosts map will be mounted with the
+#	"nosuid" and "nodev" options unless the "suid" and "dev"
+#	options are explicitly given.
+#
+#/net	-hosts
+#
+# Include /etc/auto.master.d/*.autofs
+# To add an extra map using this mechanism you will need to add
+# two configuration items - one /etc/auto.master.d/extra.autofs file
+# (using the same line format as the auto.master file)
+# and a separate mount map (e.g. /etc/auto.extra or an auto.extra NIS map)
+# that is referred to by the extra.autofs file.
+#
++dir:/etc/auto.master.d
+#
+# If you have fedfs set up and the related binaries, either
+# built as part of autofs or installed from another package,
+# uncomment this line to use the fedfs program map to access
+# your fedfs mounts.
+#/nfs4  /usr/sbin/fedfs-map-nfs4 nobind
+#
+# Include central master map if it can be found using
+# nsswitch sources.
+#
+# Note that if there are entries for /net or /misc (as
+# above) in the included master map any keys that are the
+# same will not be seen as the first read key seen takes
+# precedence.
+#
++auto.master

etc/auto.master.d##hostname.pi01/auto.das

@@ -0,0 +1,2 @@
+hdd3tb -fstype=ext4,rw :/dev/disk/by-uuid/1f2719c5-e32c-429d-83c8-9a38921fde5a
+usb64gb -fstype=ext4,rw :/dev/disk/by-uuid/de37650f-bf6a-48b7-b6ea-4dafa966b289

etc/auto.master.d##hostname.pi01/das.autofs

@@ -0,0 +1 @@
+/mnt/das /etc/auto.master.d/auto.das --timeout 300

etc/autofs.conf##hostname.pi01

@@ -0,0 +1,435 @@
+#
+# Define default options for autofs.
+#
+[ autofs ]
+#
+# master_map_name - default map name for the master map.
+#
+master_map_name = /etc/auto.master
+#
+# timeout - set the default mount timeout in seconds. The internal
+#	    program default is 10 minutes, but the default installed
+#	    configuration overrides this and sets the timeout to 5
+#	    minutes to be consistent with earlier autofs releases.
+#
+timeout = 300
+#
+# master_wait - set the default maximum number of retries (actual
+# 		iterations is half this, each is delayed by 2 seconds
+# 		before retrying) waiting for the master map to become
+# 		available if it cannot be read at program start
+# 		(default 10, then continue). This can be longer
+# 		if the map source itself waits for availability
+# 		(such as sss).
+#
+#master_wait = 10
+#
+# negative_timeout - set the default negative timeout for
+# 		     failed mount attempts (default 60).
+#
+#negative_timeout = 60
+#
+# mount_verbose - use the -v flag when calling mount(8) and log some
+#		  process information about the requestor and its
+#		  parent.
+#
+#mount_verbose = no
+#
+# mount_wait - time to wait for a response from mount(8).
+# 	       Setting this timeout can cause problems when
+# 	       mount would otherwise wait for a server that
+# 	       is temporarily unavailable, such as when it's
+# 	       restarting. The default setting (-1) of waiting
+# 	       for mount(8) usually results in a wait of around
+# 	       3 minutes.
+#
+#mount_wait = -1
+#
+# umount_wait - time to wait for a response from umount(8).
+#
+#umount_wait = 12
+#
+# browse_mode - maps are browsable by default.
+#
+browse_mode = no
+#
+# mount_nfs_default_protocol - set the default protocol that mount.nfs(8)
+#			       uses when performing a mount. Autofs needs
+#			       to know the default NFS protocol that
+#			       mount.nfs(8) uses so it can do special case
+#			       handling for its availability probe for
+#			       different NFS protocols. Since we can't
+#			       identify the default automatically we need
+#			       to set it in our configuration.
+#
+#mount_nfs_default_protocol = 3
+#
+# append_options - append to global options instead of replace.
+#
+#append_options = yes
+#
+# logging - set default log level "none", "verbose" or "debug"
+#
+#logging = none
+#
+# force_standard_program_map_env - disable the use of the "AUTOFS_"
+#			prefix for standard environment variables when
+#			executing a program map. Since program maps
+#			are run as the privileged user this opens
+#			automount(8) to potential user privilege
+#			escalation when the program map is written
+#			in a language that can load components from,
+#			for example, a user home directory.
+#
+# force_standard_program_map_env = no
+#
+# use_mount_request_log_id - Set whether to use a mount request log
+#			id so that log entries for specific mount
+#			requests can be easily identified in logs
+#			that have multiple concurrent requests.
+#
+#use_mount_request_log_id = no
+#
+# Define base dn for map dn lookup.
+#
+# Define server URIs
+#
+# ldap_uri - space separated list of server uris of the form
+# 	     <proto>://<server>[/] where <proto> can be ldap
+# 	     or ldaps. The option can be given multiple times.
+# 	     Map entries that include a server name override
+# 	     this option.
+#
+#	     This configuration option can also be used to
+#	     request autofs lookup SRV RRs for a domain of
+#	     the form <proto>:///[<domain dn>]. Note that a
+#	     trailing "/" is not allowed when using this form.
+#	     If the domain dn is not specified the dns domain
+#	     name (if any) is used to construct the domain dn
+#	     for the SRV RR lookup. The server list returned
+#	     from an SRV RR lookup is refreshed according to
+#	     the minimum ttl found in the SRV RR records or
+#	     after one hour, whichever is less.
+#
+#ldap_uri = ""
+#
+# ldap_timeout - timeout value for the synchronous API calls
+#		  (default is LDAP library default).
+#
+#ldap_timeout = -1
+#
+# ldap_network_timeout - set the network response timeout (default 8).
+#
+#ldap_network_timeout = 8
+#
+# search_base - base dn to use for searching for map search dn.
+# 		Multiple entries can be given and they are checked
+# 		in the order they occur here.
+#
+#search_base = ""
+#
+# Define the LDAP schema to used for lookups
+#
+# If no schema is set autofs will check each of the schemas
+# below in the order given to try and locate an appropriate
+# basdn for lookups. If you want to minimize the number of
+# queries to the server set the values here.
+#
+#map_object_class = nisMap
+#entry_object_class = nisObject
+#map_attribute = nisMapName
+#entry_attribute = cn
+#value_attribute= nisMapEntry
+#
+# Other common LDAP naming
+#
+#map_object_class = automountMap
+#entry_object_class = automount
+#map_attribute = ou
+#entry_attribute = cn
+#value_attribute= automountInformation
+#
+#map_object_class = automountMap
+#entry_object_class = automount
+#map_attribute = automountMapName
+#entry_attribute = automountKey
+#value_attribute= automountInformation
+#
+# auth_conf_file - set the default location for the SASL
+#		   authentication configuration file.
+#
+#auth_conf_file = /etc/autofs_ldap_auth.conf
+#
+# map_hash_table_size - set the map cache hash table size.
+# 			Should be a power of 2 with a ratio of
+# 			close to 1:8 for acceptable performance
+# 			with maps up to around 8000 entries.
+# 			See autofs.conf(5) for more details.
+#
+#map_hash_table_size = 1024
+#
+# use_hostname_for_mounts - nfs mounts where the host name resolves
+# 			to more than one IP address normally need
+# 			to use the IP address to ensure a mount to
+# 			a host that isn't responding isn't done.
+# 			If that behaviour is not wanted then set
+#			this to "yes", default is "no".
+#
+#use_hostname_for_mounts = "no"
+#
+# disable_not_found_message - The original request to add this log message
+# 			 needed it to be unconditional. That produces, IMHO,
+# 			 unnecessary noise in the log so a configuration option
+# 			 has been added to provide the ability to turn it off.
+# 			 The default is "no" to maintain the current behaviour.
+#
+#disable_not_found_message = "no"
+#
+# use_ignore_mount_option - This option is used to enable the use of autofs
+#			pseudo option "disable". This option is used as a
+#			hint to user space that the mount entry should be
+#			ommitted from mount table listings. The default is
+#			"no" to avoid unexpected changes in behaviour and
+#			so is an opt-in setting.
+#
+#use_ignore_mount_option = no
+#
+# sss_master_map_wait - When sssd is starting up it can sometimes return
+#			"no such entry" for a short time until it has read
+# 			in the LDAP map information. Internal default is 0
+# 			(don't wait) or 10 if sss supports returning EHSTDOWN.
+# 			If there is a problem with autofs not finding the
+# 			master map at startup (when it should) then try setting
+# 			this to 10 or more. If the sss library supports returning
+# 			EHOSTDOWN when the provider is down then this value
+# 			is how long to wait between retries reading the
+# 			master map. When reading dependent maps or looking
+# 			up a map key this value is multiplied by the number
+# 			of retries that would be used when reading the master
+# 			map. (Default, 0 or 10 if sss suppprts returning
+# 			EHOSTDOWN).
+#
+#sss_master_map_wait = 0
+#
+# Options for the amd parser within autofs.
+#
+# amd configuration options that are aren't used, haven't been
+# implemented or have different behaviour within autofs.
+#
+# A number of the amd configuration options are not used by autofs,
+# some because they are not relevant within autofs, some because
+# they are done differently in autofs and others that are not yet
+# implemented.
+#
+# Since "mount_type" is always autofs (because there's no user space
+# NFS server) the configuration entries relating to that aren't used.
+# Also, server availability is done differently within autofs so the
+# options that relate to the amd server monitoring sub-system are
+# also not used.
+#
+# These options are mount_type, auto_attrcache, portmap_program,
+# nfs_vers_ping, nfs_allow_any_interface, nfs_allow_insecure_port,
+# nfs_proto, nfs_retransmit_counter, nfs_retransmit_counter_udp,
+# nfs_retransmit_counter_tcp, nfs_retransmit_counter_toplvl,
+# nfs_retry_interval, nfs_retry_interval_udp, nfs_retry_interval_tcp,
+# nfs_retry_interval_toplvl and nfs_vers.
+#
+#
+# Other options that are not used within the autofs implementation:
+#
+# log_file, truncate_log - autofs used either stderr when running in
+#	the foreground or sends its output to syslog so an alternate
+#	log file (or truncating the log) can't be used.
+#
+# print_pid - there's no corresponding option for this within autofs.
+#
+# use_tcpwrappers, show_statfs_entries - there's no user space NFS
+#	server to control access to so this option isn't relevant.
+#	The show_statfs_entries can't be implemented for the same
+#	reason.
+#
+# debug_mtab_file - there's no user space NFS server and autofs
+#	avoids using file based mtab whenever possible.
+#
+# sun_map_syntax - obviously, are provided by autofs itself.
+#
+# plock, show_statfs_entries, preferred_amq_port - not supported.
+#
+# ldap_cache_maxmem, ldap_cache_seconds - external ldap caching
+#	is not used by autofs.
+#
+# ldap_proto_version - autofs always attempts to use the highest
+#	available ldap protocol version.
+#
+# cache_duration, map_reload_interval, map_options - the map
+#	entry cache is continually updated and stale entries
+#	cleaned on re-load, which is done when map changes are
+#	detected so these configuration entries are not used
+#	by autofs.
+#
+# localhost_address - is not used within autofs. This
+#	configuration option was only used in the amd user
+#	space server code and is not relevant within autofs.
+#
+#
+# Options that are handled differently within autofs:
+#
+# pid_file - must be given as a command line option on startup.
+#
+# print_version - program version and feature information is obtained
+#	by using the automount command line option "-V".
+#
+# debug_options, log_options - autofs has somewhat more limited
+#	logging and debug logging options. When the log_options
+#	options is encountered it is converted to the nearest
+#	matching autofs logging option. Since the configuration
+#	option debug_options would be handled the same way it
+#	is ignored.
+#
+# restart_mounts - has no sensible meaning within autofs because autofs
+#	always tries to re-connect to existing mounts. While this
+#	has its own set of problems not re-connecting to existing
+#	mounts always results in a non-functional automount tree if
+#	mounts were busy at the last shutdown (as is also the case
+#	with amd when using mount_type autofs).
+#
+# forced_unmounts - detaching mounts often causes serious problems
+#	for users of existing mounts. It is used by autofs in some
+#	cases, either at the explicit request of the user (with a
+#	command line or init option) and in some special cases during
+#	program operation but is avoided whenever possible.
+#
+#
+# A number of configuration options are not yet implemented:
+#
+# fully_qualified_hosts - not yet implemented.
+#
+# unmount_on_exit - since autofs always tries to re-connect
+#	to mounts left mounted from a previous shutdown this
+#	is a sensible option to implement and that will be
+#	done.
+#
+# exec_map_timeout - a timeout is not currently used for
+#	for program maps, might be implemented.
+#
+# tag - the tag option is not implemented within autofs.
+#
+#
+# Supported options:
+#
+# arch, karch, os, osver - these options default to what is returned
+#	from uname(2) and can be overridden if required.
+#
+# full_os - has no default and must be set in the configuration
+#	if used in maps.
+#
+# cluster - if not set defaults to the host domain name. This option
+#	corresponds to the HP_UX cluster name (according to the amd
+#	source) and is probably not used in Linux but is set anyway.
+#
+# vendor - has a default value of "unknown", it must be set in the
+#	configuration if used in maps.
+#
+# auto_dir - is the base name of the mount tree used for external
+#	mounts that are sometimes needed by amd maps. Its default
+#	value is "/a".
+#
+# map_type - specifies the autofs map source, such as file, nis,
+#	ldap etc. and has no default value set.
+#
+# map_defaults - is used to override /defaults entries within maps
+#	and can be used to provide different defaults on specific
+#	machines without having to modify centrally managed maps.
+#	It is empty by default.
+#
+# search_path - colon seperated paths to search for maps that
+#	are not specified as a full path.
+#
+# dismount_interval - is equivalent to the autofs timeout option. It
+#	is only possible to use this with type "auto" mounts due
+#	to the way the autofs kernel module performs expiry. It
+#	takes its default value from the autofs internal default
+#	of 600 seconds.
+#
+# browsable_dirs - make map keys visible in directory listings.
+#	Note that support for the "fullybrowsable" option cannot
+#	be added using the existing kernel to user space autofs
+#	implementation.
+#
+# autofs_use_lofs - if set to "yes" autofs will attempt to use bind
+#	mounts for type "link" entries when possible.
+#
+# nis_domain - allows setting of a domain name other than the system
+#	default.
+#
+# local_domain - is used to override (or set) the host domain name.
+#
+# normalize_hostnames - if set to "yes" then the contents of ${rhost}
+#	is translated in its official host name.
+#
+# domain_strip - if set to "yes" the domain name part of the host
+# 	is stripped when normalizing hostnames. This can be useful
+#	when using of the same maps in a multiple domain environment.
+#
+# normalize_slashes - is set to "yes" by default and will collapse
+#	multiple unescaped occurrences of "/" to a single "/".
+#
+# selectors_in_defaults, selectors_on_default - has a default value
+#	of "no". If set to "yes" then any defaults entry will be
+#	checked for selectors to determine the values to be used.
+#	selectors_in_defaults is the preferred option to use.
+#
+# ldap_base - has no default value. It must be set to the base dn
+#	that is used for queries if ldap is to be used as a map
+#	source.
+#
+# ldap_hostports - has no default value set. It must be set to
+#	the URI of the LDAP server to be used for lookups when
+#	ldap is used a map source. It may contain a comma or
+#	space seperated list of LDAP URIs.
+#
+# hesiod_base - the base name used for hesiod map sources.
+#
+# Additional configuration options added:
+#
+# linux_ufs_mount_type - set the default system filesystem type that's
+#	used for mount type ufs. There's no simple way to determine
+#	what the system default filesystem is and am-utils needs to
+#	be continually updated to do this and can easily get it wrong
+#	anyway.
+#
+#
+# Define global options for the amd parser within autofs.
+#
+[ amd ]
+#
+# Override the internal default with the same timeout that
+# is used by the override in the autofs configuration, sanity
+# only change.
+#
+dismount_interval = 300
+#
+# map_type = file
+#
+# Overriding this can cause autofs to use less resources because
+# it will use symlinks instead of bind mounts in certain cases.
+# You should ensure that the autofs kernel module you are using
+# supports expiration of symlinks for best results (although this
+# appears to work reasonably well most of the time without the
+# update).
+#
+# autofs_use_lofs = yes
+#
+# Several configuration options can be set per mount point.
+# In particulr map_type, map_name, map_defaults, search_path,
+# browsable_dirs, dismount_interval and selectors_in_defaults
+# (not all of which are currently implemented, see above).
+#
+# Also, if a section for an amd mount point is defined here
+# it isn't necessary to specify the format in the corresponding
+# master map entry and the format will be inherited for type
+# "auto" mounts.
+#
+#[ /example/mount ]
+#dismount_interval = 60
+#map_type = nis

etc/default/hd-idle##hostname.pi01

@@ -0,0 +1,37 @@
+# defaults file for hd-idle
+
+# start hd-idle automatically?
+START_HD_IDLE=true
+HD_IDLE_OPTS="-i 0 -a sda -i 1200"
+
+# hd-idle command line options
+# Options are:
+#  -a <name>               Set device name of disks for subsequent idle-time
+#                          parameters (-i). This parameter is optional in the
+#                          sense that there's a default entry for all disks
+#                          which are not named otherwise by using this
+#                          parameter. This can also be a symlink
+#                          (e.g. /dev/disk/by-uuid/...)
+#  -i <idle_time>          Idle time in seconds.
+#  -c <command_type>       Api call to stop the device. Possible values are "scsi"
+#                          (default value) and "ata".
+#  -s symlink_policy       Set the policy to resolve symlinks for devices.
+#                          If set to "0", symlinks are resolve only on start.
+#                          If set to "1", symlinks are also resolved on runtime
+#                          until success. By default symlinks are only resolve on start.
+#                          If the symlink doesn't resolve to a device, the default
+#                          configuration will be applied.
+#  -l <logfile>            Name of logfile (written only after a disk has spun
+#                          up). Please note that this option might cause the
+#                          disk which holds the logfile to spin up just because
+#                          another disk had some activity. This option should
+#                          not be used on systems with more than one disk
+#                          except for tuning purposes. On single-disk systems,
+#                          this option should not cause any additional spinups.
+#
+# Options not exactly useful here:
+#  -t <disk>               Spin-down the specified disk immediately and exit.
+#  -d                      Debug mode. It will print debugging info to
+#                          stdout/stderr (/var/log/syslog if started as with systemctl)
+#  -h                      Print usage information.
+#HD_IDLE_OPTS="-i 180 -l /var/log/hd-idle.log"

opt/syncthing/docker-compose.yml##hostname.pi01

@@ -0,0 +1,14 @@
+version: "3.0"
+
+services:
+  syncthing:
+    image: syncthing/syncthing:1.22.2
+    restart: unless-stopped
+    environment:
+      PUID: 1000
+      PGID: 1000
+      STGUIADDRESS: ""
+    hostname: gerar
+    network_mode: host
+    volumes:
+      - /mnt/das/usb64gb/syncthing:/var/syncthing