|
|
|
|
@ -0,0 +1,435 @@
|
|
|
|
|
#
|
|
|
|
|
# Define default options for autofs.
|
|
|
|
|
#
|
|
|
|
|
[ autofs ]
|
|
|
|
|
#
|
|
|
|
|
# master_map_name - default map name for the master map.
|
|
|
|
|
#
|
|
|
|
|
master_map_name = /etc/auto.master
|
|
|
|
|
#
|
|
|
|
|
# timeout - set the default mount timeout in seconds. The internal
|
|
|
|
|
# program default is 10 minutes, but the default installed
|
|
|
|
|
# configuration overrides this and sets the timeout to 5
|
|
|
|
|
# minutes to be consistent with earlier autofs releases.
|
|
|
|
|
#
|
|
|
|
|
timeout = 300
|
|
|
|
|
#
|
|
|
|
|
# master_wait - set the default maximum number of retries (actual
|
|
|
|
|
# iterations is half this, each is delayed by 2 seconds
|
|
|
|
|
# before retrying) waiting for the master map to become
|
|
|
|
|
# available if it cannot be read at program start
|
|
|
|
|
# (default 10, then continue). This can be longer
|
|
|
|
|
# if the map source itself waits for availability
|
|
|
|
|
# (such as sss).
|
|
|
|
|
#
|
|
|
|
|
#master_wait = 10
|
|
|
|
|
#
|
|
|
|
|
# negative_timeout - set the default negative timeout for
|
|
|
|
|
# failed mount attempts (default 60).
|
|
|
|
|
#
|
|
|
|
|
#negative_timeout = 60
|
|
|
|
|
#
|
|
|
|
|
# mount_verbose - use the -v flag when calling mount(8) and log some
|
|
|
|
|
# process information about the requestor and its
|
|
|
|
|
# parent.
|
|
|
|
|
#
|
|
|
|
|
#mount_verbose = no
|
|
|
|
|
#
|
|
|
|
|
# mount_wait - time to wait for a response from mount(8).
|
|
|
|
|
# Setting this timeout can cause problems when
|
|
|
|
|
# mount would otherwise wait for a server that
|
|
|
|
|
# is temporarily unavailable, such as when it's
|
|
|
|
|
# restarting. The default setting (-1) of waiting
|
|
|
|
|
# for mount(8) usually results in a wait of around
|
|
|
|
|
# 3 minutes.
|
|
|
|
|
#
|
|
|
|
|
#mount_wait = -1
|
|
|
|
|
#
|
|
|
|
|
# umount_wait - time to wait for a response from umount(8).
|
|
|
|
|
#
|
|
|
|
|
#umount_wait = 12
|
|
|
|
|
#
|
|
|
|
|
# browse_mode - maps are browsable by default.
|
|
|
|
|
#
|
|
|
|
|
browse_mode = no
|
|
|
|
|
#
|
|
|
|
|
# mount_nfs_default_protocol - set the default protocol that mount.nfs(8)
|
|
|
|
|
# uses when performing a mount. Autofs needs
|
|
|
|
|
# to know the default NFS protocol that
|
|
|
|
|
# mount.nfs(8) uses so it can do special case
|
|
|
|
|
# handling for its availability probe for
|
|
|
|
|
# different NFS protocols. Since we can't
|
|
|
|
|
# identify the default automatically we need
|
|
|
|
|
# to set it in our configuration.
|
|
|
|
|
#
|
|
|
|
|
#mount_nfs_default_protocol = 3
|
|
|
|
|
#
|
|
|
|
|
# append_options - append to global options instead of replace.
|
|
|
|
|
#
|
|
|
|
|
#append_options = yes
|
|
|
|
|
#
|
|
|
|
|
# logging - set default log level "none", "verbose" or "debug"
|
|
|
|
|
#
|
|
|
|
|
#logging = none
|
|
|
|
|
#
|
|
|
|
|
# force_standard_program_map_env - disable the use of the "AUTOFS_"
|
|
|
|
|
# prefix for standard environment variables when
|
|
|
|
|
# executing a program map. Since program maps
|
|
|
|
|
# are run as the privileged user this opens
|
|
|
|
|
# automount(8) to potential user privilege
|
|
|
|
|
# escalation when the program map is written
|
|
|
|
|
# in a language that can load components from,
|
|
|
|
|
# for example, a user home directory.
|
|
|
|
|
#
|
|
|
|
|
# force_standard_program_map_env = no
|
|
|
|
|
#
|
|
|
|
|
# use_mount_request_log_id - Set whether to use a mount request log
|
|
|
|
|
# id so that log entries for specific mount
|
|
|
|
|
# requests can be easily identified in logs
|
|
|
|
|
# that have multiple concurrent requests.
|
|
|
|
|
#
|
|
|
|
|
#use_mount_request_log_id = no
|
|
|
|
|
#
|
|
|
|
|
# Define base dn for map dn lookup.
|
|
|
|
|
#
|
|
|
|
|
# Define server URIs
|
|
|
|
|
#
|
|
|
|
|
# ldap_uri - space separated list of server uris of the form
|
|
|
|
|
# <proto>://<server>[/] where <proto> can be ldap
|
|
|
|
|
# or ldaps. The option can be given multiple times.
|
|
|
|
|
# Map entries that include a server name override
|
|
|
|
|
# this option.
|
|
|
|
|
#
|
|
|
|
|
# This configuration option can also be used to
|
|
|
|
|
# request autofs lookup SRV RRs for a domain of
|
|
|
|
|
# the form <proto>:///[<domain dn>]. Note that a
|
|
|
|
|
# trailing "/" is not allowed when using this form.
|
|
|
|
|
# If the domain dn is not specified the dns domain
|
|
|
|
|
# name (if any) is used to construct the domain dn
|
|
|
|
|
# for the SRV RR lookup. The server list returned
|
|
|
|
|
# from an SRV RR lookup is refreshed according to
|
|
|
|
|
# the minimum ttl found in the SRV RR records or
|
|
|
|
|
# after one hour, whichever is less.
|
|
|
|
|
#
|
|
|
|
|
#ldap_uri = ""
|
|
|
|
|
#
|
|
|
|
|
# ldap_timeout - timeout value for the synchronous API calls
|
|
|
|
|
# (default is LDAP library default).
|
|
|
|
|
#
|
|
|
|
|
#ldap_timeout = -1
|
|
|
|
|
#
|
|
|
|
|
# ldap_network_timeout - set the network response timeout (default 8).
|
|
|
|
|
#
|
|
|
|
|
#ldap_network_timeout = 8
|
|
|
|
|
#
|
|
|
|
|
# search_base - base dn to use for searching for map search dn.
|
|
|
|
|
# Multiple entries can be given and they are checked
|
|
|
|
|
# in the order they occur here.
|
|
|
|
|
#
|
|
|
|
|
#search_base = ""
|
|
|
|
|
#
|
|
|
|
|
# Define the LDAP schema to used for lookups
|
|
|
|
|
#
|
|
|
|
|
# If no schema is set autofs will check each of the schemas
|
|
|
|
|
# below in the order given to try and locate an appropriate
|
|
|
|
|
# basdn for lookups. If you want to minimize the number of
|
|
|
|
|
# queries to the server set the values here.
|
|
|
|
|
#
|
|
|
|
|
#map_object_class = nisMap
|
|
|
|
|
#entry_object_class = nisObject
|
|
|
|
|
#map_attribute = nisMapName
|
|
|
|
|
#entry_attribute = cn
|
|
|
|
|
#value_attribute= nisMapEntry
|
|
|
|
|
#
|
|
|
|
|
# Other common LDAP naming
|
|
|
|
|
#
|
|
|
|
|
#map_object_class = automountMap
|
|
|
|
|
#entry_object_class = automount
|
|
|
|
|
#map_attribute = ou
|
|
|
|
|
#entry_attribute = cn
|
|
|
|
|
#value_attribute= automountInformation
|
|
|
|
|
#
|
|
|
|
|
#map_object_class = automountMap
|
|
|
|
|
#entry_object_class = automount
|
|
|
|
|
#map_attribute = automountMapName
|
|
|
|
|
#entry_attribute = automountKey
|
|
|
|
|
#value_attribute= automountInformation
|
|
|
|
|
#
|
|
|
|
|
# auth_conf_file - set the default location for the SASL
|
|
|
|
|
# authentication configuration file.
|
|
|
|
|
#
|
|
|
|
|
#auth_conf_file = /etc/autofs_ldap_auth.conf
|
|
|
|
|
#
|
|
|
|
|
# map_hash_table_size - set the map cache hash table size.
|
|
|
|
|
# Should be a power of 2 with a ratio of
|
|
|
|
|
# close to 1:8 for acceptable performance
|
|
|
|
|
# with maps up to around 8000 entries.
|
|
|
|
|
# See autofs.conf(5) for more details.
|
|
|
|
|
#
|
|
|
|
|
#map_hash_table_size = 1024
|
|
|
|
|
#
|
|
|
|
|
# use_hostname_for_mounts - nfs mounts where the host name resolves
|
|
|
|
|
# to more than one IP address normally need
|
|
|
|
|
# to use the IP address to ensure a mount to
|
|
|
|
|
# a host that isn't responding isn't done.
|
|
|
|
|
# If that behaviour is not wanted then set
|
|
|
|
|
# this to "yes", default is "no".
|
|
|
|
|
#
|
|
|
|
|
#use_hostname_for_mounts = "no"
|
|
|
|
|
#
|
|
|
|
|
# disable_not_found_message - The original request to add this log message
|
|
|
|
|
# needed it to be unconditional. That produces, IMHO,
|
|
|
|
|
# unnecessary noise in the log so a configuration option
|
|
|
|
|
# has been added to provide the ability to turn it off.
|
|
|
|
|
# The default is "no" to maintain the current behaviour.
|
|
|
|
|
#
|
|
|
|
|
#disable_not_found_message = "no"
|
|
|
|
|
#
|
|
|
|
|
# use_ignore_mount_option - This option is used to enable the use of autofs
|
|
|
|
|
# pseudo option "disable". This option is used as a
|
|
|
|
|
# hint to user space that the mount entry should be
|
|
|
|
|
# ommitted from mount table listings. The default is
|
|
|
|
|
# "no" to avoid unexpected changes in behaviour and
|
|
|
|
|
# so is an opt-in setting.
|
|
|
|
|
#
|
|
|
|
|
#use_ignore_mount_option = no
|
|
|
|
|
#
|
|
|
|
|
# sss_master_map_wait - When sssd is starting up it can sometimes return
|
|
|
|
|
# "no such entry" for a short time until it has read
|
|
|
|
|
# in the LDAP map information. Internal default is 0
|
|
|
|
|
# (don't wait) or 10 if sss supports returning EHSTDOWN.
|
|
|
|
|
# If there is a problem with autofs not finding the
|
|
|
|
|
# master map at startup (when it should) then try setting
|
|
|
|
|
# this to 10 or more. If the sss library supports returning
|
|
|
|
|
# EHOSTDOWN when the provider is down then this value
|
|
|
|
|
# is how long to wait between retries reading the
|
|
|
|
|
# master map. When reading dependent maps or looking
|
|
|
|
|
# up a map key this value is multiplied by the number
|
|
|
|
|
# of retries that would be used when reading the master
|
|
|
|
|
# map. (Default, 0 or 10 if sss suppprts returning
|
|
|
|
|
# EHOSTDOWN).
|
|
|
|
|
#
|
|
|
|
|
#sss_master_map_wait = 0
|
|
|
|
|
#
|
|
|
|
|
# Options for the amd parser within autofs.
|
|
|
|
|
#
|
|
|
|
|
# amd configuration options that are aren't used, haven't been
|
|
|
|
|
# implemented or have different behaviour within autofs.
|
|
|
|
|
#
|
|
|
|
|
# A number of the amd configuration options are not used by autofs,
|
|
|
|
|
# some because they are not relevant within autofs, some because
|
|
|
|
|
# they are done differently in autofs and others that are not yet
|
|
|
|
|
# implemented.
|
|
|
|
|
#
|
|
|
|
|
# Since "mount_type" is always autofs (because there's no user space
|
|
|
|
|
# NFS server) the configuration entries relating to that aren't used.
|
|
|
|
|
# Also, server availability is done differently within autofs so the
|
|
|
|
|
# options that relate to the amd server monitoring sub-system are
|
|
|
|
|
# also not used.
|
|
|
|
|
#
|
|
|
|
|
# These options are mount_type, auto_attrcache, portmap_program,
|
|
|
|
|
# nfs_vers_ping, nfs_allow_any_interface, nfs_allow_insecure_port,
|
|
|
|
|
# nfs_proto, nfs_retransmit_counter, nfs_retransmit_counter_udp,
|
|
|
|
|
# nfs_retransmit_counter_tcp, nfs_retransmit_counter_toplvl,
|
|
|
|
|
# nfs_retry_interval, nfs_retry_interval_udp, nfs_retry_interval_tcp,
|
|
|
|
|
# nfs_retry_interval_toplvl and nfs_vers.
|
|
|
|
|
#
|
|
|
|
|
#
|
|
|
|
|
# Other options that are not used within the autofs implementation:
|
|
|
|
|
#
|
|
|
|
|
# log_file, truncate_log - autofs used either stderr when running in
|
|
|
|
|
# the foreground or sends its output to syslog so an alternate
|
|
|
|
|
# log file (or truncating the log) can't be used.
|
|
|
|
|
#
|
|
|
|
|
# print_pid - there's no corresponding option for this within autofs.
|
|
|
|
|
#
|
|
|
|
|
# use_tcpwrappers, show_statfs_entries - there's no user space NFS
|
|
|
|
|
# server to control access to so this option isn't relevant.
|
|
|
|
|
# The show_statfs_entries can't be implemented for the same
|
|
|
|
|
# reason.
|
|
|
|
|
#
|
|
|
|
|
# debug_mtab_file - there's no user space NFS server and autofs
|
|
|
|
|
# avoids using file based mtab whenever possible.
|
|
|
|
|
#
|
|
|
|
|
# sun_map_syntax - obviously, are provided by autofs itself.
|
|
|
|
|
#
|
|
|
|
|
# plock, show_statfs_entries, preferred_amq_port - not supported.
|
|
|
|
|
#
|
|
|
|
|
# ldap_cache_maxmem, ldap_cache_seconds - external ldap caching
|
|
|
|
|
# is not used by autofs.
|
|
|
|
|
#
|
|
|
|
|
# ldap_proto_version - autofs always attempts to use the highest
|
|
|
|
|
# available ldap protocol version.
|
|
|
|
|
#
|
|
|
|
|
# cache_duration, map_reload_interval, map_options - the map
|
|
|
|
|
# entry cache is continually updated and stale entries
|
|
|
|
|
# cleaned on re-load, which is done when map changes are
|
|
|
|
|
# detected so these configuration entries are not used
|
|
|
|
|
# by autofs.
|
|
|
|
|
#
|
|
|
|
|
# localhost_address - is not used within autofs. This
|
|
|
|
|
# configuration option was only used in the amd user
|
|
|
|
|
# space server code and is not relevant within autofs.
|
|
|
|
|
#
|
|
|
|
|
#
|
|
|
|
|
# Options that are handled differently within autofs:
|
|
|
|
|
#
|
|
|
|
|
# pid_file - must be given as a command line option on startup.
|
|
|
|
|
#
|
|
|
|
|
# print_version - program version and feature information is obtained
|
|
|
|
|
# by using the automount command line option "-V".
|
|
|
|
|
#
|
|
|
|
|
# debug_options, log_options - autofs has somewhat more limited
|
|
|
|
|
# logging and debug logging options. When the log_options
|
|
|
|
|
# options is encountered it is converted to the nearest
|
|
|
|
|
# matching autofs logging option. Since the configuration
|
|
|
|
|
# option debug_options would be handled the same way it
|
|
|
|
|
# is ignored.
|
|
|
|
|
#
|
|
|
|
|
# restart_mounts - has no sensible meaning within autofs because autofs
|
|
|
|
|
# always tries to re-connect to existing mounts. While this
|
|
|
|
|
# has its own set of problems not re-connecting to existing
|
|
|
|
|
# mounts always results in a non-functional automount tree if
|
|
|
|
|
# mounts were busy at the last shutdown (as is also the case
|
|
|
|
|
# with amd when using mount_type autofs).
|
|
|
|
|
#
|
|
|
|
|
# forced_unmounts - detaching mounts often causes serious problems
|
|
|
|
|
# for users of existing mounts. It is used by autofs in some
|
|
|
|
|
# cases, either at the explicit request of the user (with a
|
|
|
|
|
# command line or init option) and in some special cases during
|
|
|
|
|
# program operation but is avoided whenever possible.
|
|
|
|
|
#
|
|
|
|
|
#
|
|
|
|
|
# A number of configuration options are not yet implemented:
|
|
|
|
|
#
|
|
|
|
|
# fully_qualified_hosts - not yet implemented.
|
|
|
|
|
#
|
|
|
|
|
# unmount_on_exit - since autofs always tries to re-connect
|
|
|
|
|
# to mounts left mounted from a previous shutdown this
|
|
|
|
|
# is a sensible option to implement and that will be
|
|
|
|
|
# done.
|
|
|
|
|
#
|
|
|
|
|
# exec_map_timeout - a timeout is not currently used for
|
|
|
|
|
# for program maps, might be implemented.
|
|
|
|
|
#
|
|
|
|
|
# tag - the tag option is not implemented within autofs.
|
|
|
|
|
#
|
|
|
|
|
#
|
|
|
|
|
# Supported options:
|
|
|
|
|
#
|
|
|
|
|
# arch, karch, os, osver - these options default to what is returned
|
|
|
|
|
# from uname(2) and can be overridden if required.
|
|
|
|
|
#
|
|
|
|
|
# full_os - has no default and must be set in the configuration
|
|
|
|
|
# if used in maps.
|
|
|
|
|
#
|
|
|
|
|
# cluster - if not set defaults to the host domain name. This option
|
|
|
|
|
# corresponds to the HP_UX cluster name (according to the amd
|
|
|
|
|
# source) and is probably not used in Linux but is set anyway.
|
|
|
|
|
#
|
|
|
|
|
# vendor - has a default value of "unknown", it must be set in the
|
|
|
|
|
# configuration if used in maps.
|
|
|
|
|
#
|
|
|
|
|
# auto_dir - is the base name of the mount tree used for external
|
|
|
|
|
# mounts that are sometimes needed by amd maps. Its default
|
|
|
|
|
# value is "/a".
|
|
|
|
|
#
|
|
|
|
|
# map_type - specifies the autofs map source, such as file, nis,
|
|
|
|
|
# ldap etc. and has no default value set.
|
|
|
|
|
#
|
|
|
|
|
# map_defaults - is used to override /defaults entries within maps
|
|
|
|
|
# and can be used to provide different defaults on specific
|
|
|
|
|
# machines without having to modify centrally managed maps.
|
|
|
|
|
# It is empty by default.
|
|
|
|
|
#
|
|
|
|
|
# search_path - colon seperated paths to search for maps that
|
|
|
|
|
# are not specified as a full path.
|
|
|
|
|
#
|
|
|
|
|
# dismount_interval - is equivalent to the autofs timeout option. It
|
|
|
|
|
# is only possible to use this with type "auto" mounts due
|
|
|
|
|
# to the way the autofs kernel module performs expiry. It
|
|
|
|
|
# takes its default value from the autofs internal default
|
|
|
|
|
# of 600 seconds.
|
|
|
|
|
#
|
|
|
|
|
# browsable_dirs - make map keys visible in directory listings.
|
|
|
|
|
# Note that support for the "fullybrowsable" option cannot
|
|
|
|
|
# be added using the existing kernel to user space autofs
|
|
|
|
|
# implementation.
|
|
|
|
|
#
|
|
|
|
|
# autofs_use_lofs - if set to "yes" autofs will attempt to use bind
|
|
|
|
|
# mounts for type "link" entries when possible.
|
|
|
|
|
#
|
|
|
|
|
# nis_domain - allows setting of a domain name other than the system
|
|
|
|
|
# default.
|
|
|
|
|
#
|
|
|
|
|
# local_domain - is used to override (or set) the host domain name.
|
|
|
|
|
#
|
|
|
|
|
# normalize_hostnames - if set to "yes" then the contents of ${rhost}
|
|
|
|
|
# is translated in its official host name.
|
|
|
|
|
#
|
|
|
|
|
# domain_strip - if set to "yes" the domain name part of the host
|
|
|
|
|
# is stripped when normalizing hostnames. This can be useful
|
|
|
|
|
# when using of the same maps in a multiple domain environment.
|
|
|
|
|
#
|
|
|
|
|
# normalize_slashes - is set to "yes" by default and will collapse
|
|
|
|
|
# multiple unescaped occurrences of "/" to a single "/".
|
|
|
|
|
#
|
|
|
|
|
# selectors_in_defaults, selectors_on_default - has a default value
|
|
|
|
|
# of "no". If set to "yes" then any defaults entry will be
|
|
|
|
|
# checked for selectors to determine the values to be used.
|
|
|
|
|
# selectors_in_defaults is the preferred option to use.
|
|
|
|
|
#
|
|
|
|
|
# ldap_base - has no default value. It must be set to the base dn
|
|
|
|
|
# that is used for queries if ldap is to be used as a map
|
|
|
|
|
# source.
|
|
|
|
|
#
|
|
|
|
|
# ldap_hostports - has no default value set. It must be set to
|
|
|
|
|
# the URI of the LDAP server to be used for lookups when
|
|
|
|
|
# ldap is used a map source. It may contain a comma or
|
|
|
|
|
# space seperated list of LDAP URIs.
|
|
|
|
|
#
|
|
|
|
|
# hesiod_base - the base name used for hesiod map sources.
|
|
|
|
|
#
|
|
|
|
|
# Additional configuration options added:
|
|
|
|
|
#
|
|
|
|
|
# linux_ufs_mount_type - set the default system filesystem type that's
|
|
|
|
|
# used for mount type ufs. There's no simple way to determine
|
|
|
|
|
# what the system default filesystem is and am-utils needs to
|
|
|
|
|
# be continually updated to do this and can easily get it wrong
|
|
|
|
|
# anyway.
|
|
|
|
|
#
|
|
|
|
|
#
|
|
|
|
|
# Define global options for the amd parser within autofs.
|
|
|
|
|
#
|
|
|
|
|
[ amd ]
|
|
|
|
|
#
|
|
|
|
|
# Override the internal default with the same timeout that
|
|
|
|
|
# is used by the override in the autofs configuration, sanity
|
|
|
|
|
# only change.
|
|
|
|
|
#
|
|
|
|
|
dismount_interval = 300
|
|
|
|
|
#
|
|
|
|
|
# map_type = file
|
|
|
|
|
#
|
|
|
|
|
# Overriding this can cause autofs to use less resources because
|
|
|
|
|
# it will use symlinks instead of bind mounts in certain cases.
|
|
|
|
|
# You should ensure that the autofs kernel module you are using
|
|
|
|
|
# supports expiration of symlinks for best results (although this
|
|
|
|
|
# appears to work reasonably well most of the time without the
|
|
|
|
|
# update).
|
|
|
|
|
#
|
|
|
|
|
# autofs_use_lofs = yes
|
|
|
|
|
#
|
|
|
|
|
# Several configuration options can be set per mount point.
|
|
|
|
|
# In particulr map_type, map_name, map_defaults, search_path,
|
|
|
|
|
# browsable_dirs, dismount_interval and selectors_in_defaults
|
|
|
|
|
# (not all of which are currently implemented, see above).
|
|
|
|
|
#
|
|
|
|
|
# Also, if a section for an amd mount point is defined here
|
|
|
|
|
# it isn't necessary to specify the format in the corresponding
|
|
|
|
|
# master map entry and the format will be inherited for type
|
|
|
|
|
# "auto" mounts.
|
|
|
|
|
#
|
|
|
|
|
#[ /example/mount ]
|
|
|
|
|
#dismount_interval = 60
|
|
|
|
|
#map_type = nis
|
BatchAccount 1001